 |
|
Option 'M'
The passive models CA 1201 and CA 1215 can also be ordered with the Option 'M' (monitor angle) to then be used as stage monitors. |
|
|
 |
|
Option 'AS'
All speakers with a monitor angle can also be ordered as an axial symmetrical version so that monitor pairs (horn to horn) can be set up. |
|
|
 |
|
Option 'Suspension'
The SW 112 and SW 215E can optionally be equipped with flying points as well as flying tracks from 'allsafe JUNGFALK'. |
|
|
 |
|
Option 'XO'
The K&F subwoofers with the option 'XO' have a switchable passive crossover. For uses where an easy set-up is required, the bass range can be expanded using this option. |
|
|
 |
|
Option '100 Volt'
Selected systems can be optionally equipped with a high-quality 100V toroidal transformer. This minimises acoustic loss so that top results can even be achieved with K&F 100V speakers. |
|
|
 |
|
Option 'Barrier Strip'
Selected systems can be optionally equipped with a Barrier Strip, which is suitable for fixed installations where the connection should be made without an additional plug connector. The barrier strip is capable of clamping wires with a conductor area from 0.2 up to 4 mm². |
|
|
 |
|
Option 'Special Finish in RAL Colours'
All speakers can be painted in colours according to the RAL colour chart and can, thus, be created to meet your individual needs. The acoustic foam is also adapted to match the selected colour.
RAL colour charts are available from RAL German Institute for Quality Assurance and Certification e. V. |
|
|
 |
|
Option 'Outdoor Mobile'
Protected from moisture, for permanent outdoor use under roofing to protect it from direct weather exposure. Special characteristics: models like the standard version but the enclosure is completely coated with a multi-layered temperature and UV resistant high-tech PU marine primer; a final coat with a highly resistant two-component textured paint in RAL colours; waterproofed cones; electronic elements protected against corrosion (sealing wax); etc. |
|
|
 |
|
Option 'Outdoor Installation'
Like 'Outdoor Mobile', but with a connecting terminal made of V2A stainless steel and connectors with cable glands. Some of the differences pertain to the speakers, i.e. instead of 'allsafe JUNGFALK' flying points, which are normally used, there are M10 thread inserts out of V2A stainless steel; the front foam on most models is mounted behind a V2A stainless steel protective grille. Handles, feet, stacking grooves, and locking profiles are not included. All visible screws are made of V2A stainless steel. Please see the corresponding user's manual for further information. |
|
|
 |
|
Option 'Installation' 
The speakers, based on standard models with the option 'Installation', have been optimised for unobtrusive, and with numerous M10 mounting points, they allow for a variable, simple and safe mounting in fixed installations.
Optically bothersome elements such as handles, feet, foot grooves, stand adapters, etc. are not present with the option 'Installations'.
This option is available for the passive Version of CA 1201, CA 1215, CA 1515 and Line 212.
|
|
|