|
| Description |
|
- 1 x 18" subwoofer with integrated driver and amplifier technology
- Bass reflex enclosure in direct radiation design with exponantial tunnel geometry
- Suitable for fixed installations
- Max. SPL 133 dB (peak / 1 m / half space)
|
|
|
 |
|
|
|
|
| Design |
|
Bass reflex system with exponential tunnel
geometry, integrated driver and
amplifier technology |
|
| Lower cut-off frequency -10 dB |
|
30 Hz ('FILTERS ON') |
|
| Frequency range ±3 dB |
|
38 Hz - 300 Hz ('FILTERS OFF'),
37 Hz - 115 Hz ('FILTERS ON') |
|
| Max SPL |
|
127 dB (peak / 1 m / free field,
equivalent 133 dB half space) |
|
| Components |
|
18“ long excursion chassis, double-spider,
100 mm voice coil, internal and external ventilation,
minimizeddistortions through demodulation
rings (double DDR) |
|
| Input connectors |
|
Pin 1 = Masse / Pin 2 = + Signal / Pin 3 = - Signal
LINE IN: XLR 3-Pol female
LINE OUT: XLR 3-Pol male, parallel zu LINE IN |
|
| Enclosure |
|
15 mm frame reinforced multiplex plywood,
impact proof black structured paint (PU),
ball proof steel grille with exchangeable front foam |
|
| Rigging |
|
suspendable with 8 x concealed thread
inserts M12 |
|
| Dimensions |
|
600 x 672 x 640 mm (W x H x D) |
|
|
|
|
|
| Options |
|
'special finish in RAL colours' |
|
| Article number |
|
35566 K&F SWi 118E - SP (RAL 9005, black)
35567 K&F SWi 118E - SP (RAL Special Colour) |
|
Accessories SWi 118E - SP
|
|
|
| Single Bar |
|
including Delta-bracket and 2 x 1/2"shakle
Art.-Nr. 31064 black |
|
|
|
|
|
|
| Single Bar 'Align-Set' |
|
(supplement for Single Bar)
1 x Half-Coupler wide with eyenut, 1 x Half-Coupler narrow with M12 screw, 1 x rotation-bracket, 1 x safety
Art.-Nr. 30845 black |
|
|
|
|
|
|
| M12 x 35 eyebolt |
|
Art.-Nr. 35615 black |
|
|
|
|
|
|
| Protective cover SW 118E |
|
Art.-Nr. 65910 black |
|
|
|
|
|
| Recommendation |
|
Optional system controller:
K&F CD 44 and K&F CD 24 Digital System Controller.
Only necessary when parallel operations of mid-high systems and the optional function High-Boost, Top Low Cut and 2-way active mode are desired, as well as for the system supplement with mid-high systems without ‘SP’ Module.
For many K&F Speaker models, parameter data for selected digital signal processors are available upon request. |
|
| Specifications |
|
High power subwoofer with exponential tunnel geometry, optimised for fixed installations. Integrated driver and amplifier technology. Components: One 18" long excursion chassis with bass reflex tuning. Frame reinforced multiplex plywood enclosure with impact proof structured PU-paint. Highly permeable, ball
proof steel grille with exchangeable front foam. 8 M12 thread inserts enable flown operations. Option: special finish in RAL colours.
Technical specifications:
Frequency response: 30 Hz - 2.5 kHz (-10 dB), 38 Hz - 300 Hz (±3 dB), Sensitivity: 97 dB (40 - 300 Hz), max. SPL: 134 dB (Peak / 1 m / full room), size:
(W x H x D) 600 x 680 x 766 mm, Weight: 48.7 kg. Option: finish in RAL colours. Input module: Input sensitivity:
+6 dB / 1,55 Vrms for zero attenuation, input impedance: 50 kO (balanced / unbalanced), driver circuit: high pass, low pass, phase alignment, frequency de-emphasis (EQ), peak limiter, RMS limiter. Amplifier module: Power: 1000 W @ 8 O (EIAJ / 1 kHz, 1% THD), damping factor: > 500 (100 Hz), > 100 (10 kHz), cooling: air convection (without fan), protection circuits: short circuit, over-temperature, clipping, and overload, supply voltage (230V version): AC 195-250 V, 50 / 60 Hz, power consumption (230V version): 1 A nominal (4 A max.)
Model: K&F SWi 118E - SP |
|